32 | SAMLEX AMERICA INC.
SAMLEX AMERICA INC. | 33
4.1.3.4 "Select Parameter" Menu Maps for (i) Parameter Group 6: TIME SET-
TING and (ii) Parameter Group 7: STOP SD CARD
S e l e c t
P a r a m e t e r
T I M E S E T T I N G
*
E n t e r
t h e
t i m e
2 0 0 0 / 0 1 / 0 1 0 0 : 0 0
S e l e c t
P a r a m e t e r
S T O P S D C A R D
0 = N o
NOTE:
Value shown in the 4th line of the display screen is the default / factory pre-set value. For additional programming
details, refer to (i) Section 4.9 for “TIME SETTING” and (ii) Section 4.10 for STOP SD CARD”
Group 6
"TIME SETTING"
Group 7
"STOP SD CARD"
Fig 4.5 "Select Parameter" Menu Map for (i) Parameter Group 6:
TIME SETTING and (ii) Parameter Group 7: STOP SD CARD.
4.2 PARAMETER SETUP PROCEDURE
4.2.1 General Information - Parameter Setup Procedure
Please refer to Fig 4.6.
The
Enter
key is used to enter "Select Group" Menu Map from any Operating Mode Screen shown
in Figs 3.1 to 3.5.
Example in Fig 4.6 starts with Inverting Mode Screen [(Screen 1 in Figs 3.2(a) and 3.2(b)]. After
the
Enter
key is pressed, the
Up/Down
keys are used to navigate to one of the 7 "Select Group"
Screens (Fig 4.1). When the Group for the desired setting is displayed on the LCD, the
Enter
Key
is used again to select this Group. The
Up
and
Down
Keys are used to move to the individual
screens within the Group.
Pressing the
Back
Key will exit to the previous level.
i
INFO
There is a 30 second timeout for setting parameters; after 30 seconds the Setting
Mode will be cancelled and the display will revert to the Operating Mode Screen
associated with current operation.
It is highly recommended to set the EVO
TM
Date and Time (Parameter Group 6, Screen No. 6 in
Fig 4.1)) as this value is used to record data logging files. (Refer to Section 4.9 for Date
and Time set up).
SECTION 4 |
Parameter Setup
Summary of Contents for Evolution Series
Page 89: ...SAMLEX AMERICA INC 89 Notes...
Page 90: ...90 SAMLEX AMERICA INC Notes...
Page 91: ...SAMLEX AMERICA INC 91 Notes...
