Samlexpower Evolution Series, Owner'S Manual

Page: 82 / 92

82 | SAMLEX AMERICA INC.
• Data as in Fig 5.4 will be displayed on your Worksheet, with the Log Data stored in
Columns and Rows.
Fig 5.4 Screen Shot and Data Log Work Sheet
5.4 SAVING / UPLOADING PROGRAMMED PARAMETERS
5.4.1 Saving Programmed Parameters
All the programmed parameters can be saved on an SD Card (FAT 16 / FAT 32 Format, up to
16 GB capacity). The parameters will be saved in File named “xxxx_yyy.cfg”, where the first
group of 4 digits xxxx is the Model No. e.g. 1212F or 1224F or 2212 or 2224 or 3012 or
4024 and the second group of 3 digits YYY is the Revision No. for that Model e.g. 074.
• For saving, first insert the SD Card in the SD Card Slot.
• Then, go to “Parameter Save” Screen (See Table 4.8 and Section 4.8.2.11) – under
heading "PARAMETER SAVE"). Steps are given below:
Password 8052
See Section 4.3.1
S e l e c t G r o u p
* C H A R G E C U R V E
ð
S e l e c t P a r a m e t e r
* O T H E R F U N C T I O N
ð
S e l e c t P a r a m e t e r
O T H E R F U N C T I O N
* P O W E R S A V I N G
0 = D i s a b l e
S e l e c t P a r a m e t e r
O T H E R F U N C T I O N
* P A R A M E T E R S A V E
0 = N o
Down Key x 4 times
Enter Key Down Key x 10 times
ð
P a s s w o r d k e y i n
0 0 0 0
ð
S e l e c t P a r a m e t e r
O T H E R F U N C T I O N
* P A R A M E T E R S A V E
0 = N o
Enter Key
S e l e c t P a r a m e t e r
O T H E R F U N C T I O N
P A R A M E T E R S A V E
1 = Y e s
ð
S a v e d f i l e e n d .
ð
S e l e c t P a r a m e t e r
O T H E R F U N C T I O N
* P A R A M E T E R S A V E
0 = N o
Down Key
Press Enter Key, hold for
3 to 4 sec and release
SECTION 5 |
SD Card
Enter Key
Enter Key
ð
ð