Index revision : A
27
7118
10.3. Paint hoses
It is not necessary to remove the electro-pneumatic coupling (
see § 10.2 page 26
) to complete
these operations.
•
Step 1
: Unscrew the locknut of the cable
gland using a 27 flat wrench, remove the
cable gland from the bracket.
•
Step 2
: With a 21 flat wrench, unscrew the
upper nut on the paint hose. Unscrew the nut
while turning the hose.
For the reassembly step,
screw the upper nut on the paint hose until reaching its stop point.
Position the locknut of the cable gland below the bracket, with the cable gland above in the
hexagonal imprint. Clamp the locknut of the cable gland onto the bracket.
Step 1
Step 2
