Index revision : A
24
7118
9. Examples of poor equipment use
The non-exhaustive list below indicates the primary cases of poor paint spraying equipment
use.
WARNING :
SAMES KREMLIN
would like to recall therefore that it is essential to comply with
the prescriptions listed below.
It is prohibited
to install the control module in an explosive atmosphere.
It is prohibited
to perform excessive and repeated traction on the paint and air hose or on
the electrical cable connecting the gun.
It is prohibited
to disconnect the gun’s electrical coupling in an explosive atmosphere.
It is prohibited
to leave the hoses and electrical cable in a space where vehicles circulate,
preventing the risk of them being crushed or severed.
It is prohibited
to spray a liquid other than paint or varnish using the
Nanogun Airmix
®
H
2
O
It is prohibited
to leave the gun or subject it to mechanical shocks.
It is prohibited
to leave the gun on the floor.
It is prohibited
to use the gun in order to handle or displace the parts to be painted.
It is prohibited
to let the gun soak in a solvent or spray it with solvent.
It is prohibited
to spray solvent without first having turned off the control module and/or shut
down the high voltage at the level of the gun.
It is essential to
connect the control module ground terminal to the paint insulation ground
terminal.
It is essential to
clamp both safety screws on the electrical coupling.
