![background image](http://html1.mh-extra.com/html/sames-kremlin/nanogun-airmix-h2o/nanogun-airmix-h2o_user-manual_3696968034.webp)
Index revision : A
34
7118
10.8. Switch
•
Step 1
: With a 5.5-mm screwdriver, unscrew
the washer head screw. Pull the switch lever
upward.
•
Step 2
: Replace the O-ring (
see § 13.2 page
54
). Insert the new switch into its housing.
Coat the retaining screw with LOCTITE low
strength thread lock and then clamp the
screw so that the switch shows slight resist-
ance.
10.9. Trigger
•
Step 1
: Using a screwdriver, unscrew the two
washer head screws and remove both sides
of the trigger.
Reassembly of the trigger:
• Insert one of the trigger sides onto its shoulder
and then slide the other side into its housing.
Step 1
Step 2
Step 1