en
59 / 108
8.3
Automatic cooking time correction
The user can switch this setting off or on, see page 60 chapter 8.5
If the cooking time correction function has been activated and if you work with the short time clock or the
automatic basket lift, the control automatically extends the cooking time for large portions.
This has the benefit that you do not need to change the frying period for different filled quantities.
Determining the cooking time setting
To determine the time setting, fry 1/5 of the maximum quantity so that the cooking time correction function
can determine optimal settings.
Example: Maximum quantity 1000 grams, 1/5 is equivalent with 200 grams.
Set the required setpoint temperature for the food to be fried.
Fill frying basket with 200 grams of food to be fried.
Start short time clock with a sufficiently high cooking time setting (e.g. 10 minutes).
Insert the frying basket with the food to be fried into the bowl without time loss.
Monitor the cooking process: When the food is cooked, read and write down the displayed remaining
time.
Calculate the frying time based on the cooking time setting (e.g. 10 minutes) and the remaining. time
If the frying result is right, different quantities can be fried based on the determined time.
If you change the product to be fried, e.g. the manufacturer or switch from refrigerated to deep frozen
products, you should check the cooking time setting.
8.4
Automatic switching to standby mode
The control switches the deep-fat fryer automatically to standby mode if
−
no key was pressed for a period of 30 minutes (factory setting), or
−
the control could not determine a temperature drop that would indicate a frying process.
Settings for standby mode, see page 60 Chapter 8.5
−
Switching the standby mode function off and on,
−
standby temperature in bowl,
−
time setting from that the standby mode is to start.
Display of the standby mode
Three dashes "- - -" glow on both displays.
The setpoint temperature is set back to 90
°
C (factory setting).
Terminating the standby mode
Press any key "1, 2, 3 or 4".
The temperature and time previously set are shown on the display.
The indicator light in the key glows.
The appliance heats to the set setpoint temperature.
-
“Timer“ option functions