Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
87
setting 2(S2), setting 3(S3), setting 4(S4).
Recall Setting
The option ‘Recall Setting’ could apply to restore not only the
factory configuration(default setting) but also can recall setting
1(S1), setting 2(S2), setting 3(S3), setting 4(S4).
5.2.6 Data Display and Storage
1. Measured Values Displayed in Real Time
Default right window is the tab page ‘data display’, as shown in the red box in Fig.70.
Fig.70 The Harmonic Waveform Display
The measured values of fundamental wave, harmonic 1, harmonic 2.frequency, noise and AUX-ADC1, AUX-ADC2,
AUX-ADC3, AUX-ADC4 are displayed in real time during testing. Please note that letters ‘m’,’u’,’n’,’f’,’p’ represents
10
-3
,10
-6
,10
-9
,10
-12
.
2. Data Storage
The software has the function of data storage. Users can choose to save the data or not that SE1022D collects in a
period.
The saved data contains the X/Y/R/
θ
of measure signal or signal harmonic, frequency, noise and the ADC1/ADC2/
ADC3/ADC4 of 4 AUX_ADC inputs.
