Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
117
4. Start the spectral measurement and collect data from the data collection platform. Then, you will get an
uncalibrated spectral curve as is shown in Fig.98.
Fig.98 Spectrum Curve measured by SE1022D
5. Use the SR830 instead of the SE1022D to measure. Repeat the steps above to run the same experiment. Then
you will get another spectral curve as is shown in Fig.99. You can see that these two curves measured by SE1022D
and SR830 are almost the same.
Fig.99 The Contrast Spectrum Curve between SR830 and SE1022D
7.4 Serial Communication
This example will show how to remotely run the serial communication. You need an USB cable. The steps are as
follows:
1. Use an USB cable to connect the USB of the SE1022D to the USB socket of the PC.
