Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
86
Equation
The output of Equation can be E1/E2/E3/E4. The input can be the
X/Y/R/
θ
of signals in two channels or signal harmonic, the ADC1/
ADC2/ADC3/ADC4 of AUX_ADC input, noise frequency and
C1/C2.
C1
Set the input of Equation manually. The range is -10 to +10,
and the minimum resolution is 0.001.
C2
Note that:
After setting the output configuration, click the button
to finish1. the configuration. All settings can
be changed simultaneously and you only need to click the button
once.
After changing the settings, you need to click this button
to finish this configuration. Otherwise,
changes of settings will not be saved.
2. Setting Storage
The software has the function of setting storage. Users can choose to save current setting or load previously saved setting.
The details of configuration are shown in Table 12.
Fig.69 The Configuration Area of Setting Storage
Table 12 Data Buffer Settings Options
System Setting
Users can select default setting or setting 1(S1), setting 2(S2), setting
3(S3), setting 4(S4).
Save Setting
Users can save current setting as default setting or setting 1(S1),
