Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
51
Fig.41 <Remote> Submenu
There are 3 function settings in the submenu, including <Remote>, <Baud Rate>, and <Parity>.
<Remote> :
Setting the communication port.
<USB>
Use common USB as communication port.
<RS232>
Use common 9-pin RS-232 connector as communication port.
<Baud Rate>
Setting the baud rate.
Press the corresponding soft keys and knob to adjust the baud rate. The value can be set as
<600>, <1200>, <2400>, <9600>, <19200>, <38000>, <43000>, <56000>, <57600>,
<115200>, <230400>, <380400>, <460800> and <921600>.
<Parity>
Setting the parity.
<Even>
Even
<ODD>
Odd
<NONE>
nothing
Attention: When using USB as the communication port, there is no need to set <Baud Rate> or <Parity>.<Baud Rate>
and <Parity> are only use for setting parameters of serial port communication.
3.8.4 < Reset? >: The Lock-in Reset
Press the corresponding soft key and the system will be restarted.
3.9
[AUTO SET]
There are 4 settings in [AUTO SET] submenu, including <Auto Reserve>, <Auto Gain>, <Auto Phase> and < Auto
Scale >, as is shown in Fig.42. Soft key [CH A/B SWITCH] is provided for switching between two channels. Users can
also switch between two channels through knob.
