Saluki S3601 Series User Manual Download Page 16

Page: 16 / 140

Tel: 886.2.2175 2930 Email: [email protected]

www.salukitec.com

Fig.3-3 Utility Keys

【

Save

】

It’s used for saving instrument status, calibration data or Measure data in specified files.

【

System

】

It’s used for some system-related configuration and selection of software language, etc.

【

Preset

】

It’s used to reset Analyzer to default (predefined) status.

【

Recall

】

It’s used for invoking files containing Analyzer status, calibration data and Measure data.

【

Print

】

It’s used to start printing function, select print settings and printer for printing.

【

Micro/Local

】



When Analyzer is in external control state, press this key to make the Analyzer re-respond to the buttons on front panel.



When Analyzer is in normal working state, press this key to access a set of user-defined macros associated with

executable files.
Analyzer can name and store 10 macros at most.

【

F 1

】

It is used to record shortcut keys in operating a certain Measure (the record can be effective only by operating with front-panel
keys).

【

F 2

】

It is used to record shortcut keys in operating a certain Measure (the record can be effective only by operating with front-panel
keys).

【

Help

】

It is used to open the user manual of the analyzer (a built-in file).

3.1.3.

Response Zone

Summary of Contents for S3601 Series













































































































































Search results

Summary of Contents for S3601 Series

Reviews:

Related manuals for S3601 Series

Brands by name

Popular brands

Saluki S3601 Series, User Manual

Search results

Summary of Contents for S3601 Series

Reviews:

Related manuals for S3601 Series

Brands by name

Popular brands