Saluki S3601 Series User Manual Download Page 13

Page: 13 / 140

Tel: 886.2.2175 2930 Email: [email protected]

www.salukitec.com

the device.

b) Device should be proper grounded so as to prevent personal injuries caused by poor or false grounding
c) When cleaning the device, please unplug the device to avoid electric shock. Use dry or moist soft cloth to clean the device. Do

not clean the internal of the device.

d) Before using this device, personnel need to be trained. When using the device, concentration is required. Operation by

unqualified people may cause personal injuries and property losses.

e) Use of this device when power line is broken is prohibited. Regular check on power line is necessary. Proper measures

should be taken to keep power line in good state and prevent stumble and electric shock.

Field use of the device when there is lightning is prohibited, which may cause personal injuries and property loss.

Summary of Contents for S3601 Series













































































































































Search results

Summary of Contents for S3601 Series

Reviews:

Related manuals for S3601 Series

Brands by name

Popular brands

Saluki S3601 Series, User Manual

Search results

Summary of Contents for S3601 Series

Reviews:

Related manuals for S3601 Series

Brands by name

Popular brands