53
54
3.
Position Locking Clip
It should be about 2.5 c.m (1in.)
from vehicle belt’s latch plate.
4.
Rebuckle Vehicle Belt
5.
Check Belt Tightness
Hold child restraint at the belt path
with your weakest hand.
Push and pull from side to side.
If it moves more than 2.5 cm (1 in.),
try reinstalling the child restraint or
try another seating location.
When installed rear facing
,
recheck the level lines to make
sure it is reclined according to your
child’s weight.
When installed forward facing
,
make sure to tighten the tether
strap.
Remove the locking clip when
the seat belt is not being used
with a child restraint.
Dorel Juvenile Group Information
Thank you for choosing this child restraint and booster seat.
The DJG family is committed to creating child restraints with the
most comfort and convenience available today.
Remember, parents are a child’s first teachers and examples.
If you always buckle your seat belt, your child will think it is the
natural thing to do.
Make it a firm rule that the vehicle does not go until everyone is
buckled up. Make no exceptions.
No one can predict if use of a child restraint will prevent injury or
death in a particular crash. However, when combined with care-
ful driving, proper use of a child restraint can lower a child’s risk
of injury or death in most crashes.
Your child’s safety is worth the time it will take to read and fol-
low these instructions. After reading, if you still have questions
or have any concerns with this child restraint, please contact our
Consumer Relations Department at:
Website:
www
.
djgusa.com
Telephone:
1-800-544-1108
M-TH from 8 A.M. to 6 P.M. EST
FRI from 8 A.M. to 4:30 P.M. EST
Mailing Address:
Dorel Juvenile Group, Inc.
Consumer Relations Department
P.O. Box 2609
Columbus, IN 47202-2609
Fax:
1-800-207-8182
4358-6870 CAN Alpha Select ENG.indd C53-C54
4358-6870 CAN Alpha Select ENG.indd C53-C54
2/10/16 12:18 PM
2/10/16 12:18 PM
