43
44
continued on next page
2.
Route UAS Connector
without Adjuster Closest
to it Through Forward-
Facing Belt Path
Do not twist belt.
4.
Place Child Restraint
Forward Facing Flush
Against Vehicle Seat
Back
Do not use any recline positions
except to make the child restraint
flush against the vehicle seat back.
Vehicle seat back must be upright.
3.
Finished UAS Routing
Adjuster
MUST
be on the left side
of the child restraint as shown.
5.
Loosely Attach Tether
Hook
Check vehicle owner’s manual for
specific location.
7.
Tighten Belt
Place knee in child restraint.
Firmly push down while pulling
free end of belt to tighten.
It may be easier to pull pad away
from shell and tighten the belt
through the belt path opening as
shown.
8.
Tighten Tether
With knee still in child restraint,
push firmly on the back of the seat
and tighten tether strap.
6.
Connect UAS to
Vehicle Anchor
NOTE:
The UAS connector’s red
release button
MUST
face away
from child restraint and the arrows
on connectors
MUST
face up.
Fasten one UAS connector to the
UAS anchor bar in the vehicle seat
bight. Repeat for other side of
child restraint.
4358-6870 CAN Alpha Select ENG.indd C43-C44
4358-6870 CAN Alpha Select ENG.indd C43-C44
2/10/16 12:18 PM
2/10/16 12:18 PM
