19
20
9.
Thread Harness
Strap Into Shoulder
Harness Guides
10.
From Back, Thread
Harness Strap OVER
Metal Bar
DO NOT
twist harness strap.
11.
Attach Harness Strap
Loops to Splitter Plate
As Shown
Sewn ends of the harness strap
loops
MUST
face towards you.
DO NOT
twist harness strap or
harness adjustment strap.
Correct
Sewn
End
WARNINGS:
Failure to place the harness
adjustment strap between shell and the
harness strap as shown can result in serious
injury or death.
Harness strap MUST be threaded over the metal headrest
adjustment bar.
Harness system must be installed correctly.
Failure to follow these warnings can result in serious
injury or death.
Make sure the same harness strap loops are fitted
COMPLETELY ON
both sides of the splitter plate.
Accessories
Harness Covers
To remove harness covers
, unhook
the harness strap from splitter plate,
pull harness strap out of the upper
harness guides and remove harness
covers.
Rethread harness strap and attach the
harness strap loops to the splitter
plate. (See page 19.)
Infant Head Support
Infant head support
MUST
not cover
the infant’s face in any way. Remove
the head support when the infant’s
head has reached the top, inside part
of the infant head support.
To remove the support
, unhook the
harness strap from splitter plate, pull
harness strap out of the upper har-
ness guides and remove infant head
support.
Rethread harness strap and attach
the harness strap loops to the splitter
plate. (See page 19.)
4358-6870 CAN Alpha Select ENG.indd C19-C20
4358-6870 CAN Alpha Select ENG.indd C19-C20
2/10/16 12:18 PM
2/10/16 12:18 PM
