17
18
2.
Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle
MUST
face out.
You
MUST
use the 1st or 2nd
buckle slots when child restraint is
used rear facing.
Any slot can be used when
forward facing.
1.
Fully Recline the Child
Restraint
Pull out on recline handle and
push top of child restraint back.
4.
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle
MUST
not pull out.
3.
Reach Under Seat
Between Base and Shell
Pull metal retainer completely
through pad and shell.
1
2
3
Installing Harness System
continued on next page
5.
Rethread Harness
Strap
With sewn end of harness
strap loop facing the buckle
,
thread harness strap down
through hip harness guide.
7.
Make Harness Strap
Even
Sewn ends of harness strap loops
MUST
face each other.
8.
Thread Buckle and
Chest Clip
Harness strap ends go through
the back of buckle tongues and
through the chest clip front to
back as shown.
6.
Pull Harness Strap
Across Shell and Up
Through Opposite Hip
Harness Guide
Make sure the harness strap is
between shell and base and not
underneath only the seat pad.
Harness adjustment strap
MUST
lay above the harness strap as
shown.
4358-6870 CAN Alpha Select ENG.indd C17-C18
4358-6870 CAN Alpha Select ENG.indd C17-C18
2/10/16 12:18 PM
2/10/16 12:18 PM
