11
12
Reclining Child Restraint
How to Change Positions
To recline,
pull out on recline handle
and push top of child restraint back.
For upright or semi-recline
position,
pull out on recline handle
and pull top of child restraint forward.
This child restraint has 4 positions:
Rear Facing
-
4
For children 2.3-10 kg (5-22 lb)
,
fully recline the child restraint so that
the bottom level line is parallel with
the ground.
For children 10-18 kg (22-40 lb)
AND are able to sit up unassisted
,
rotate the restraint so the recline angle is between the 2 level
lines.
Forward Facing
-
1
Upright or
2
or
3
Semi-reclined
Booster Seat
-
1
Upright
NOTE:
When forward facing, the semi-reclined positions are
to be used only to install the child restraint and booster seat
flush against the vehicle seat back. Vehicle seat back must be
upright.
3
4
2
1
Removing Harness System
Only remove the harness system to clean the seat pad or to
convert into a booster seat.
To remove accessories, see page 20.
1.
Fully Loosen Harness
Strap
Push down on harness release
lever (under flap on front of seat
pad) while pulling out on harness
strap as shown.
2.
From Back, Remove
Harness Strap Loops
From Splitter Plate
3.
Pull Harness Strap Out
of Shoulder Harness
Guides
continued on next page
4358-6870 CAN Alpha Select ENG.indd C11-C12
4358-6870 CAN Alpha Select ENG.indd C11-C12
2/10/16 12:18 PM
2/10/16 12:18 PM