33
34
7.
Place Child Restraint
Rear Facing in Back
Seat
For children between 2.3-10 kg
(5-22 lb)
, the bottom level line on
shell
MUST
be parallel with the
ground.
For children 10.1-18 kg
(22-40 lb) who can sit up
unassisted
, rotate the child
restraint between the 2 level lines.
Start by making the bottom level
line parallel with the ground, then
rotate seat up. Do not rotate past
the top level line.
6.
Fully Recline the
Child Restraint
Pull out on recline handle and
push top of child restraint back.
8.
Connect UAS to
Vehicle Anchor
NOTE:
The UAS connector’s red
release button
MUST
face away
from child restraint and the arrows
on connectors
MUST
face up.
Fasten one UAS connector to the
UAS anchor bar in the vehicle seat
bight. Repeat for other side of
child restraint.
9.
Tighten Belt
Place hand in child restraint.
Firmly push down and
towards the vehicle seat back
while pulling free end of belt to
tighten.
It may be easier to pull pad away
from shell and tighten the belt
through the belt path opening as
shown.
10.
Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
2.5 cm (1 in.).
If it moves more than 2.5 cm (1 in.),
you can try:
A.
Pulling the belt tighter.
B.
Reinstalling the child restraint.
C.
Changing to a different seating location.
D.
Switching to vehicle belt installation.
continued on next page
4358-6870 CAN Alpha Select ENG.indd C33-C34
4358-6870 CAN Alpha Select ENG.indd C33-C34
2/10/16 12:18 PM
2/10/16 12:18 PM
