37
38
continued on next page
2.
Fully Recline the
Child Restraint
Pull out on recline handle and
push top of child restraint back.
3.
Place Child Restraint
Rear Facing in Back
Seat
For children between 2.3-10 kg
(5-22 lb)
, the bottom level line on
shell
MUST
be parallel with the
ground.
For children 10.1-18 kg
(22-40 lb) who can sit up
unassisted
, rotate the child
restraint between the 2 level lines.
Start by making the bottom level
line parallel with the ground, then
rotate seat up.
Do not
rotate past
the top level line.
4.
Route Vehicle Lap
or Lap/Shoulder Belt
Through Rear-Facing
Belt Path
Review pages 27-28 and your
vehicle owner’s manual to
determine what kind of vehicle
belts you have and how to lock a
child restraint in place.
5.
Reach Under Pad and
Pull Vehicle Belt Across
the Shell
Do not twist belt.
Belt
MUST
be in
front
of buckle
strap.
You
MUST
use the 1st or 2nd buckle slot.
Do not
place belt
over child’s legs.
Buckle vehicle belt.
Replace pad over corners.
1
2
3
6.
Tighten Belt
Place hand in child restraint.
Firmly push down and towards
the vehicle seat back while pulling
shoulder belt or free end of lap
belt to tighten.
It may be easier to pull pad away
from shell and tighten the belt
through the belt path opening as
shown.
7.
Check Belt Tightness
Hold child restraint at the belt path
with your weakest hand.
Push and pull from side to side.
It should not move more than 2.5
cm (1 in.).
4358-6870 CAN Alpha Select ENG.indd C37-C38
4358-6870 CAN Alpha Select ENG.indd C37-C38
2/10/16 12:18 PM
2/10/16 12:18 PM
