DT Etherlink IV
User Manual
- 102 -
Pin No. Signal RS-232
Description
Direct.
1
DTR
Data Terminal Ready
In
2
DSR
Data Set Ready
Out
3
CTS
Clear to Send
Out
6
DCD
Data Carrier Detect
Out
7
RXD
Receive Data
Out
8
RTS
Request to Send
In
9
TXD
Transmit Data
In
11
PG
Protected Ground
12
PG
Protected Ground
13
PG
Protected Ground
14
SG
Signal Ground
15
CC
Cable is Connected
In
This connector description is only correct with the RS-232 daughter board (attention, the RS-232
daughter board is different than the Nx64 daughter board!).
Available cables:
SA-CAB-DB26-ETH_IV-OPEN
Cable ETHERLINK_IV Universal, DB26MH to Open, 1.0m, UL2464, AWG-26, OD=8mm
SA-CAB-N21-ETH_IV-DCE
Cable ETHERLINK_IV Nx64 to X.21, DB26MH to DB15M, DCE, 1.0m, UL2464, AWG-28, OD=5mm
SA-CAB-N21-ETH_IV-DTE
Cable ETHERLINK_IV Nx64 to X.21, DB26MH to DB15F, DTE, 1.0m, UL2464, AWG-28, OD=5mm
SA-CAB-N35-ETH_IV-DCE
