DT Etherlink IV
User Manual
- 72 -
The DEFAULT 0 command sets the following mode: SLAVE, PAM 32, BASERATE 89,
ANNEX B, transmission of the E1 stream and Ethernet over SHDSL.
The DEFAULT 1 command sets the following mode: MASTER, PAM 32, BASERATE 89,
ANNEX B, transmission of the E1 stream and Ethernet over SHDSL.
The DEFAULT 2 command sets the following mode: SLAVE, PAM 32, BASERATE AUTO,
ANNEX A/B, transmission of the E1 stream and Ethernet over SHDSL.
The DEFAULT 3 command sets the following mode: MASTER, PAM 32, BASERATE 89,
ANNEX B, transmission of the 2xE1 stream and Ethernet over SHDSL.
4.6.5.23 <DEFAULT EVERYTHING> Command
This command sets default operation modes for line parameters (see the DEFAULT command) and
for network parameters (see the <NETDEFAULT> command). The result of this command is similar
to the result of two commands:
DEFAULT 0
NETDEFAULT
4.6.5.24 <SERNUM> Command
This command shows the production serial number of the unit.
4.6.5.25 <GSCOMPAT ON/OFF> Command
This command sets the Globespan (Conexant) compatibility mode on/off. This feature will also limit
the baserate to 36 (PAM16).
4.6.5.26 <NMTHR> Command
The <NMTHR> command allows to setup the desired Noise Margin alarm threshold in dB.
Syntax: NMTHR [value], where value is in the range from 0...25
NMTHR OFF disables the Noise Margin alarm threshold function
4.6.5.27 <LATHR> Command
The <LATHR> command allows to setup the desired Line Attenuation alarm threshold in dB.
Syntax: LATHR [value], where value is in the range from 0...25
LATHR OFF disables the Line Attenuation alarm threshold function
4.6.5.28 <PTMP [ADD/DEL] [IF]> Command
This command helps to add or delete an interface to the Point-to-Multipoint group channel.
[IF] is the name of interface to add or delete:
RS-1: RS-232 or RS-485
WAN1-WAN4: WAN interface to transmit PTMP data through
DSL1-DSL4: DSL interface transmitting WAN
DSL and E1 interface names are automatically converted to corresponding WAN channels by this
command.
4.6.5.29 <PTMP SHOW> Command
This command shows the members of the Point-to-Multipoint group channels.
