DT Etherlink IV
User Manual
- 53 -
4.6.3.9 <RESETNETSTAT> Command
This command resets the statistics from the commands NETSTAT and NETERR.
4.6.3.10 <LINKSTAT> Command
This command shows an actual quick status of the whole link.
--------------------------------------------------------------------------------
DSL 1
--------------------------------------------------------------------------------
CO link up
RR1 (N) link up
RR1 (C) link up
CP link up
--------------------------------------------------------------------------------
CO_PM>
4.6.3.11 <LINKALARM> Command
This command shows the actual alarm status for all units connected over SHDSL.
-----------------------------------------------------------------------------
Local Alarm: Major
-----------------------------------------------------------------------------
DSL 1 DSL 2
-----------------------------------------------------------------------------
RR01 Major
CO Major
-----------------------------------------------------------------------------
CO_PM>CO_PM>
4.6.3.12 <ALARMLOG [N]> Command
This command displays the alarm log (list of all alarms that were detected) for the specified SHDSL
interface.
-----------------------------------------------------------------------------
Time ago | Unit | Event | Description
-----------------------------------------------------------------------------
04:45s | LOCAL | E1-2 | LOS-S ----- BER-S ----- -----
Parameter Value
Description
IN
Bad octets
Discards
Undersize
Oversize
Fragments
Jabber
MAC error
Bad FCS
Total number of octets (bytes) received with error.
Total number of discarded packets even when no error.
Total number of received packets with size <64 bytes (68 when tagged).
Total number of received packets with size >2040 bytes (2044 when tagged).
Received packets that were undersized and had either FCS or alignment Error.
Received packets that were oversized and had either FCS or alignment Error.
Total number of packets that were dropped due to hardware errors in receiver
Total number of received frames that had bad FCS (Frame Check Sequence).
OUT
FCS error
Deferred
Collisions
Late
Excessive
Single
Multiple
Total number of transmittet octets (bytes) with error.
Total number of discarded packets even when no error.
Total number of collisions:
Number of late collisions.
LAN half-duplex, number of dropped frames due to excessive number of coll..
LAN half-duplex, number of successfully transmitted frames due to single coll..
LAN half-duplex, number of successfully transmitted frames due to multiple
collisions.
Pause
In pause
Out pause
LAN links, Number of received MAC pause frames (Flow control).
LAN links, Number of sent MAC pause frames.
