DT Etherlink IV
User Manual
- 75 -
--------------------------------------------------------------------------------
Ethernet settings : LAN1 LAN2 LAN3 LAN4 WAN1 WAN2 WAN3 WAN4 INT
Access/Trunk : Trunk Trunk Trunk Trunk Trunk Trunk Trunk Trunk ACC
Port-based VLAN : [@] [@] [@] [@] [@] [@] [@] [@] [@]
VLAN : 3
QoS : -1
VLAN1 VID=1 : - - - - + + + +
VLAN2 VID=2 : - - - - + + + +
VLAN3 VID=3 : - - - - - - + +
VLAN4 VID=4 : - - - - - - + +
VLAN5 VID=5 : - - - - - - + +
VLAN6 VID=6 : - - - - - - + +
VLAN7 VID=7 : - - - - - - + +
VLAN8 VID=8 : + + + + - - + +
OTHER VLANS : + + + + - - + +
Speed : AUTO AUTO AUTO AUTO
System settings :
MAC address : 00:0f:d9:04:a9:00
IP address : 192.168.0.235
Subnet mask : 255.255.255.0
Default gateway : 0.255.255.255
SNMP:
Send traps to IP:
Community :
SET command : Enabled
--------------------------------------------------------------------------------
VLAN (VLANs & QoS) configurations
Ethernet settings
Port identifier of the internal Ethernet switch
Mode
Type of port (trunk, access or mixed)
Port based VLAN
Isolation of ports
QoS
Priority for each of access ports
VLAN ID
VLAN identifier for each of access ports
Second VLAN tag
Configurations for the 2
nd
VLAN tag for the INT access port
VLAN1 VID=xx
:
:
VLAN8 VID=xx
Configurations and identifiers (xx=1..4094) for each of 8 VLANs which are
configured separately.
Pluses and minuses mark transmission/locking of VLAN for each of
interfaces.
OTHER VLANS
Configurations for other VLANs, which are not configured separately.
Pluses and minuses mark transmission/locking for each of interfaces.
Ethernet port configurations
Speed/Duplex
Operation mode of the Ethernet interface
IP-subsystem configurations (System)
MAC address
MAC address of the device
IP address
IP address of the device
Subnet mask
Subnet mask of the device
Default gateway
Default gateway of the device
The NETCONFIG command always displays the running configuration. If the new configuration
differs from the running one, the NETCONFIG command displays the running configuration and a
warning:
CP_NET> NETCONFIG
--------------------------------------------------------------------------------
Running Network Configuration
--------------------------------------------------------------------------------
Ethernet settings : LAN1 LAN2 LAN3 LAN4 WAN1 WAN2 WAN3 WAN4 INT
Access/Trunk : Trunk Trunk Trunk Trunk Trunk Trunk Trunk Trunk ACC
Port-based VLAN : [@] [@] [@] [@] [@] [@] [@] [@] [@]
VLAN : 3
QoS : -1
VLAN1 VID=1 : - - - - + + + +
VLAN2 VID=2 : - - - - + + + +
VLAN3 VID=3 : - - - - - - + +
VLAN4 VID=4 : - - - - - - + +
VLAN5 VID=5 : - - - - - - + +
VLAN6 VID=6 : - - - - - - + +
VLAN7 VID=7 : - - - - - - + +
VLAN8 VID=8 : + + + + - - + +
OTHER VLANS : + + + + - - + +
Speed : AUTO AUTO AUTO AUTO
