DT Etherlink IV
User Manual
- 86 -
5
SOFTWARE DOWNLOAD
Etherlink_IV devices support downloading new/old software versions to get some additional features
or to protect the devices with a released only software version. The download of the software can be
performed in following ways:
via the RS-232, USB port (LCT) by
using the “Flash Loader” program
via the RS-232, USB port (LCT) by using the X-modem protocol
via Ethernet (the X-modem protocol)
5.1
Software Download via RS-232, USB Port (LCT) Using the Flash Loader Program
To download the software on any Etherlink_IV device, do the following steps:
1. Power off the device. You may use the LP/DP switch.
2. Connect the RS-232 connector of the device (Monitor, LCT) with the Com port (RS-232) of the
Personal Computer.
3. Start the program
“flashloader.exe” on your Personal Computer (Double-click on the icon). You
can download the software on the following link:
http://www.S-Access.ch/extranetfiles/Software/FlashLoader_V12.zip
4.
Select “Set Loader Communication” in the “Setting” menu and perform the settings as shown in
the Figure below and click “Ok”.
