Runco WindowWall, Installation Manual

Page: 42 / 196

Mounting Brackets to a Wall
28 Runco WindowWall Installation Guide
5
Using a level (a digital one is highly recommended), level the bracket as you keep
in mind the string at the bottom.
6
Align the v-shaped notch on the LCD mount with the desired center of the LCD
(this is done for the first bracket only).
7
Tighten the screws as necessary.
Note: Be sure that as you tighten the screws, the wall is flat. If it is not, use shims near the
mount points as necessary.
8
Attach horizontal brackets to the LCD mount that will attach to the next LCD
mount you want to install.
9
Repeat steps
4
-
8
for the first row. Be sure to level all brackets with respect to the
first mounted bracket.
10
Using a digital level, make sure the first row is level. All brackets in a row should
be level with the bracket next to it within ±0.1°.