Runco WindowWall, Installation Manual, Page: 17 / 196

Safety Information
Runco WindowWall Installation Guide 3
10
Only use the attachments/accessories specified by the manufacturer.
11
Unplug all Runco WindowWall display wall products during lightning storms or
when unused for long periods of time.
12
You must follow all National Electrical Code regulations. In addition, be aware of
local codes and ordinances when installing your system.
13
Refer all servicing to qualified service personnel. Servicing is required when any
of the Runco WindowWall display wall products have been damaged in any way,
such as the AC power cord or plug is damaged, liquid has been spilled or objects
have fallen into a product, the products have been exposed to rain or moisture,
do not operate normally or have been dropped.
14
Keep the packing material in case the equipment should ever need to be
shipped.
15
Wall mounts must be secure. The wall must be strong enough to hold all LCD
tiles, brackets and cables. The LCD tile weighs about 48lbs (22kg).
16
Slight pressure on the LCD will cause distortion of the image. Heavier pressure
will cause permanent damage. Runco WindowWalls should be mounted where
viewers cannot touch the screen or insert small objects in the openings that will
create hazards by contacting bare conductive parts.
Caution: The front polarizer is soft and subject to scratches from sharp objects.
17
The polarizer is a thin sheet of film laminated to the outside layer of glass on the
LCD screen. Take care when handling items near the screen.
Caution: This product contains a lithium battery. There is a risk of explosion if the battery is
replaced by an incorrect type. Dispose of the battery according to the instructions on the
next page.
WARNING The backlight contains mercury.
Lamp(s) inside this product contain mercury. This product may contain other electronic waste
that can be hazardous if not disposed of properly. Recycle or dispose in accordance with local,
state, or federal Laws. For more information, contact the Electronic Industries Alliance at
www.eiae.org . For lamp specific disposal information, check www.lamprecycle.org .