Runco WindowWall, Installation Manual, Page: 124 / 196

Configuration Scenarios
110 Runco WindowWall Installation Guide
Standard Cabling With Restrictions on LCD Placement
Scenarios 4, 5 & 6 require a little more planning than the previous scenarios. The
LCDs are cabled to specific Quad Input Manager Modules depending on how they
will be used in sub walls. A system cabled for one of these scenarios can also use
scenarios 1, 2 or 3.
Scenario 4: One Sub Wall Per Quad Input Manager Module
This scenario uses an external video processor, but saves on the number of outputs
required for that processor. Each output of the processor drives four LCDs. The
processor outputs can be a higher resolution than the native 1366 x 768 resolution of
the tile, thus allowing for better use of the available pixels.
Note: 4 x 4 Runco WindowWall with one source per Quad Input Manager Module.