Runco WindowWall, Installation Manual

Page: 93 / 196

Adjusting Position
Runco WindowWall Installation Guide 79
Adjusting Position
Position moves the picture on the screen but does not move the menus.
Picture Position
Open the
PICTURE POSITION
menu (
MAIN MENU
>
ADVANCED OPTIONS
>
SIZE AND
POSITION
>
PICTURE POSITION
). The four arrow keys move the picture on the screen.
The numbers for
HORIZONTAL POSITION
and
VERTICAL POSITION
refer to the number of
pixels from sync to the first displayed pixel. These numbers get smaller as the picture
moves up and to the left.
Horizontal Position
Shows the number of pixels from the beginning of H sync to the first active pixel.
Because there are many black pixels after H sync, this number will not be zero when
the picture is at the left border of the screen.
Vertical Position
Shows the number of lines from V sync to the first active line, so it will not be zero
when the picture is at the top of the screen.
Note: Adjusting the
VERTICAL POSITION
too far may cause the image to jump or hop. If the
image appears to flicker or hop, readjust the
VERTICAL POSITION
.
P i c t u r e P o s i t i o n
U s e a r r o w k e y s t o m o v e i m a g e
H o r i z o n ta l P o s i t i o n 1 6 8
Ve r t i c a l P o s i t i o n 1 9