Runco WindowWall Installation Manual Download Page 37

Page: 37 / 196

Runco WindowWall Installation Guide

Wall Installation

Before you start building your wall, keep the following points in mind:

• A structure that is plumb and flat will greatly reduce issues with mounting and

alignment of the Runco WindowWall system.

• Brackets are to be installed first - do not remove LCDs from their boxes until the

entire wall of brackets is installed, level and plumb.

• For each row of brackets, build from the center outwards.

• After each row of brackets is built, check it for level and plumb.

• All brackets in a row should be level with the bracket next to it within ±0.1°.

Each bracket should be square with the level surface by ±0.05°. Bracket wall
planarity should not exceed ±0.5mm.

• For optimal product performance, maintain components within temperature

specifications. Occasional temperatures out of specification are acceptable for a
short period of time.

Wall Installation Options

There are three main types of Runco WindowWall installations:

• Standard installation - mounted to a wall

• Column floor stand - maximum of three high without additional support

• 2 x 2 free-standing mount

Summary of Contents for WindowWall





































































































































































































Search results

Summary of Contents for WindowWall

Reviews:

Runco WindowWall, Installation Manual, Page: 37 / 196

Search results

Summary of Contents for WindowWall

Reviews: