Runco WindowWall, Installation Manual, Page: 111 / 196

Saving and Recalling Configurations
Runco WindowWall Installation Guide 97
Changing the Name of the Memory Slot
The default name is an abbreviation of the source connector, resolution, and if Wall
Mode is on, wall settings. In the following example, the name tells you that the
source is connected to Digital, which displays 1366 x 768, is part of a 2 x 2 array, and
is the display in the upper left corner (column 1, row 1).
1
If you want a more descriptive name, select
NAME
and press
ENTER
.
A little bar appears beneath the
NAME
line.
a Use the + or - keys to move the yellow selector under the character you want
to change.
b Use the up/down arrows to change the character.
2
When you are finished, press
PREV
.
3
Select
SAVE NOW
and press
ENTER
.
Note: If you use RS232 controls, you can also use commands to send a string name to a
memory slot, saving time.
S a v e
S l o t N u m b e r 1
S a v e N o w
N a m e D I 1 3 6 6 x 7 6 8 2 x 2 1 : 1
S o u r c e D i g i ta l
C o l o r s pa c e R G B
R e s o l u t i o n 1 3 6 6 x 7 6 8
Wa l l 2 x 2 1 : 1
S c a l e / J u s t i f y O n e t o O n e / C e n t e r
P o s t i o n / O v e r s c a n 1 6 8 , 1 9 / 0 %
Z o o m U L / L R + 0 , + 0 / + 0 , + 0
Vi e w p o r t U L / L R + 0 , + 0 / + 0 , + 0
F r e q u e n c y / P h a s e 1 6 0 2 / 2 2 . 5 °
S h a r p n e s s N o r m a l
B l a c k L e v e l 6 3 5 5 5 7
W h i t e L e v e l 1 6 6 1 7 0 1 6 9