Runco WindowWall, Installation Manual, Page: 128 / 196

Configuration Scenarios
114 Runco WindowWall Installation Guide
Cabling
Cluster the displays into the groups where you want your small sub walls, and cable
each sub wall to a single Quad Input Manager Module. Cable the Loop Out of each
Quad Input Manager Module to the Dual Link In of the next module and loop the last
loop out into the Dual Link In of the first module.
Source Routing
For the Quad Input Manager Modules that are displaying a small sub wall, set each
switch to Loop, Use Internal Loop and set the Internal Loop to the display you want
to view on that sub wall.
For each display that is part of the large sub wall, set each switch to Loop, and Use
External Loop.
Set the External Loop of the Quad Input Manager Module that contains the source
for the large sub wall to that source. Set the External Loop of all the other Quad Input
Manager Modules to Dual Link In.
Wall Settings
Set the height and width for each display within a sub wall to the height and width of
that sub wall and set the unit row and unit column as appropriate.