RUMBLE HOG RH7500, Operation Manual

Page: 67 / 164

67 67
Section 2 - Rumble Hog Systems
OTB Fuse Panel
The following circuits are protected by fuses in
the OTB Fuse Panel.
1. Protects and supplies power to logic controller
1 in the OTB.
2. Protects and supplies power to logic controller
2 in the OTB.
3. Protects and supplies power to logic controller
3 in the OTB, the digital controller and joystick.
4. Protects and supplies power to the terminal
strip in the OTB.
5. Protects and supplies power to the relay that
activates the front work lights.
6. Protects and supplies power to the relay that
activates the light bar lights.
7. Protects and supplies power to the relay that
activates the rear work lights.
8. Protects and supplies power to the relay that
activates the service lights.
9. Protects and supplies power to the relay that
activates the video camera system.
10. Protects and supplies power to the relay that
activates the OMSI fluid cooler fan.
11. Protects and supplies power to the relay that
activates the toolbox lights. Also powers and
protects the remote control circuits.
12. Protects and supplies power to the relay that
activates the strobe lights.
13. ****
14. ****
OTB Fuse Panel
In-line Fuses And Circuit Breakers
Some circuits are protected by in-line fuses or
circuit breakers. The most common locations are
near the Main circuit breakers inside the battery
compartment, in the OTB or near the accessory.
The following circuits are protected by in-line fuses
and circuit breakers.
• Back Up Beeper - In-line fuse
• OTB Fuse Panel Main Power Supply - In-line
circuit breaker
• Hydraulic Fluid Cooling Fans - In-line circuit
breaker
• Engine PTO Solenoid - In-line fuse
• Laser Guidance Ground Circuit - In-line fuse
• Laser Guidance Power Circuit - In-line fuse
1
2
3
4
5
6
7
8
9
10
11
12
13
14