RUMBLE HOG RH7500, Operation Manual

Page: 59 / 164

59 59
Section 2 - Rumble Hog Systems
Rear Control Switches
Rear Control Switches
Toggle switches that are used to select or control
functions typically performed at the rear of the truck.
The following is a description of the functions per-
formed by the rear control switches.
1. CHUTE - A two position toggle switch that se-
lects the mode for the remote control switches.
Move the switch to the ON position to use the
remote switches to raise or lower the chute.
Move the switch to the OFF position to cancel
remote control.
2. DOOR - A two position toggle switch that se-
lects the mode for the remote control switches.
Move the switch to the ON position to use the
remote switches to raise or lower the door. Move
the switch to the OFF position to cancel remote
control.
3. TILT - A two position toggle switch that selects
the mode for the remote control switches. Move
the switch to the ON position to use the remote
switches to tilt or lower the debris tank. Move
the switch to the OFF position to cancel remote
control.
4. SEALS - A two position toggle switch that in-
flates and deflates the pneumatic seals on the
vacuum tube coupler and debris tank door. Move
the switch to the ON position to inflate the seals.
Move the switch to the OFF position to deflate the
seals. A pressure gauge in the digital controller
indicates seal pressure. A pressure sensor and
solenoid valve in the seal pressure line automati-
cally limit maximum seal pressure to 20-25 psi
(1.4 - 1.7 BAR).
1 2 3
4 5 6
5. LIFT (Optional) - A two position toggle switch
that selects the mode for the remote control
switches. Move the switch to the ON position
to use the remote switches to raise or lower the
debris tank and kickstand. Move the switch to
the OFF position to cancel remote control.
6. ARM - UP/DOWN - A three position momen-
tary toggle switch that raises and lowers the
cutter lift arm. The center position is OFF. Move
the switch to the ON position to raise the arm.
Move the switch to the OFF position to lower the
arm. Release the switch to stop the arm in the
desired position.