RUMBLE HOG RH7500, Operation Manual

Page: 21 / 164

21
2.1 Introduction
The Rumble Hog RH7500 is a multi-purpose
machine that can grind pavement markings, cut
grooves for in-laid pavement markings and cut
rumble strips. The cutting system is mounted
on a commercially available truck chassis. It is
available in the standard configuration without
debris recovery or optional configurations with
debris recovery.
The cutter system is powered by the truck engine
through transmission and auxiliary gearbox power
take off units. It includes a hydrostatic truck
drive system, two hydraulic systems, a hydrauli-
cally powered cutting unit, water dust supresion
system, video and laser guidance systems and a
DC electrical system. Trucks with optional debris
recovery will be equipped with vacuum system
connected to the cutter.
The cutter and most components are controlled
by soft key switches in the cab mounted digital
control panel and joystick control panels. Other
functions are controlled by the joystick, separate
cab mounted switch panels or switches located
Section 2:
Rumble Hog Systems
RH7500 W/O Debris Recovery
on the rear of the debris tank. The features and
controls on your truck will vary depending on the
options selected.
RH7500 With Debris Recovery