Configuration Guide Smart Web Configuration
1-33
Figure 1-49 WEB Console
Configuration description: Enter a CLI command in the command box, press
Ctrl+Enter
or click
Send
to send the CLI
command. When entering a command, you can press
Tab
or enter
?
to obtain the command list and command
description. Click
Clear command
to clear the content in the command box or click
Clear the screen
to clear the returned
CLI results.
1.12 Typical Configuration Examples
Configuration Key Points
The Web service is enabled on switches before delivery. You can access the IP address 192.168.1.1 to log in to the Web
management platform to manage the device. The following describes how to enable the Web service on the CLI.
Configuration Steps
To log in to the Web management platform, enable the Web service, configure an IP address, and run the
webmaster
command to configure the account and password. Then, you can access the Web management platform to complete the
Web configuration.
The detailed configuration is as follows:
Enter the configuration mode.
Ruijie#configure
