Configuration Guide Smart Web Configuration
1-11
1.8.3
Port Mirroring
Choose
Port management
>
Port Mirroring
to access the
Port Mirroring
page.
Figure 1-15 Port Mirroring
Configuration description:
The
Port Mirroring
page is editable initially because the SmartWeb allows only one mirroring port. There are two panels
on this page. The upper panel allows you to select a source port (mirrored port, multiple choices are supported) while the
lower panel allows you to select only one destination port (mirroring port). After selecting or changing ports on the panel,
click
save
. A setting success message is displayed.
The panel displays the status of current aggregate ports, which are editable. If you change a port and want to discard
the change, click
refresh
to restore the configuration status of current aggregate ports on the panel.
Members of an aggregate port cannot be used as the destination port or source port, and the destination port cannot
be the same as the source port.
1.8.4
Port Rate Limiting
Choose
Port management
>
Port rate limiting
to access the
Port rate limiting
page.
