Configuration Guide Smart Web Configuration
1-8
Figure 1-11 Configuring a Star Network Access Device
Step 1, Step 3, and Step 4 are the same as those for configuring a ring network access network.
In Step 2, you need to configure an uplink port, that is, the port for connecting to the upper-level switch. The selected
uplink port will be set as a trunk port.
After the management IP address is changed and saved, the page will be suspended and gives no response.
Change the IP address of the client to ensure that it is in the same network segment as the management IP address,
and then use the changed IP address to access the Web management system of the device.
1.8 Port Management
1.8.1
Basic Settings
Choose
Port management
>
Basic settings
to access the
Port Basic Settings
page.
