Configuration Guide Smart Web Configuration
1-13
Figure 1-17 ERPS Setting
Configuration description:
Global ERPS is disabled by default. After global ERPS is enabled, you can create multiple ERPS rings. Only simple ERPS
rings can be configured in this system while intersecting rings and tangent rings are not supported. Enter a VLAN ID and
select two ports for an ERPS ring. Only one blocking port needs to and can be specified for each ERPS ring. The device
on which the blocking port exists is configured as a Ring Protection Link (RPL) owner and the selected port is configured
as an RPL port.
1.8.6
Optical Module
Choose
Port management
>
Optical Module
to access the
Optical Module
page. On this page, you can view
information about an optical module, including the temperature, voltage, receive optical power, and transmit optical power,
and whether the optical module works in the normal state.
Figure 1-18 Optical Module
