Configuration Guide Smart Web Configuration
1-12
Figure 1-16 Port Rate Limiting
Configuration description:
Select a port on which the rate limit needs to be configured (multiple ports can be selected for batch rate limit configuration)
on the panel, move the slider below the panel to adjust the input and output limits (the rate limit value is displayed on the
right side of the slider). A selected port is not rate limited if the slider is moved rightmost. Click
Save
. A setting success
message is displayed. The rate limits configured for the ports are displayed in
Port speed limit list
. Select a port on the
panel. The slider slides to the relevant position and the specific rate limit value is displayed. You can change and save the
value.
Aggregate ports cannot be rate limited.
1.8.5
ERPS Settings
Choose
Port management
>
ERPS setting
to access the
ERPS setting
page and configure an ERPS network.
