RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
95
SHENZHEN RUIDA TECHNOLOGY CO., LTD
The laser is not powered. Please power on the laser machine.
The laser wiring is incorrect. Please check if the wiring is connecting according to the
laser model.
7.1.15
Frame crossing
When the processing is started, there is the prompt will generate. It should be the situations
as following:
The cutting graphics exceeds the maximum breadth of the machine. Please make sure
that the cutting pattern is smaller than the maximum size of the machine.
The manufacturer parameters are not set correctly, and the XY axis format does not
match the actual machine format. Please set the XY format correctly.
7.1.16
Mainboard communication failed
The mainboard communication failure may occur during using the panel. The reasons may
as following:
The cable between the panel and the mainboard is not connected correctly. Please use
the DB9 cable to connect.
The connection between the panel and the mainboard is not securely connected to the
DB9 terminal. Please check if the DB9 cable connection is stable. Please re-plug the
DB9 terminal and lock the fixing screws at both ends of the DB9 cable.
The cable between the panel and the mainboard is damaged. Please replace the new
DB9 cable.
The mainboard is not working properly. Please check whether the RUN indicator of the
main board is normally. If the indicator does not flash, please power on the main board
again.
The mainboard or panel hardware interface has failed.
7.1.17
No file
When there is no file in the memory of the mainboard, and the file is operated, a prompt that
the file does not exist will pop up. Please download the file to the mainboard through the software,
or copy the standalone file to the mainboard through the USB.
