RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
4
SHENZHEN RUIDA TECHNOLOGY CO., LTD
Receiving, Unpacking, Inspection
The product has a plastic or metal casing to protect the exterior electrical
component from damage. The product is wrapped in a foam bag and packed in an
antistatic bag. If the package has any external damage, please check the goods and
notify the carrier of the damage situation in writing
.
Important:
After receiving the products, please check whether the outer
packaging is in good condition, whether the product is complete
after unpacking, and whether the parts are in good condition. If
you find damage, please contact Ruida Technology immediately.
Keep the packaging materials and wiring accessories when unpacking. Please
be careful when disassembling the package. After unpacking the goods, please
check if the parts are complete. If you find that the parts are missing or the parts are
damaged, please contact Ruida Technology immediately. If you notice any obvious
damage to the device, do not install the device or commission the device.
RDC6563F standalone fiber cutting system delivery list is shown in the following:
（
As the product is constantly updated, the accessories that may be received are
different from this list
）
Component
Quantity
Description
RDC6563F mainboard
1
RDC6563F-HMI panel
1
DB9-3M
1
USB cable-2.0-black
1
USB Adapter cable AM/AF- 1M
1
USB Adapter cable -1M-black
1
Network cable -5M-blue
1
BWK301- Wireless handset
1
include
：
BWK301-
Wireless remote control,
BWK301R-wireless
receiver, 433MHz-2dB
helical antenna
LFS-AP02 Amplifier
1
15m Amplifier cable-black
1
