RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
59
SHENZHEN RUIDA TECHNOLOGY CO., LTD
Speed: Enter submenu, set manual speed or modify speed in real time during
processing
Power: Power: Enter the submenu, set the spot power or modify the power in real time
during processing.
Controller configuration: Enter the submenu, network settings, language settings, etc.
System Information: View board processing information, version number, etc.
Multi-positioning point setting: Enter the submenu, set multi-positioning point enable,
positioning point coordinates and so on.
Parameter backup: backup all parameters of the user and the manufacturer.
Parameter recovery: Restore the parameters of the previous backup. If the parameters
have not been backed up, the factory parameters will be restored.
Privilege setting: Enter the authorization code to activate the board
Press the direction keys to select the option, press the [Enter] key to enter the submenu or
perform the operation, and press the [Exit] key to return to the previous menu.
3.7.1 Speed settings
Press [Enter] when the [Speed] option is selected under the menu interface, the following
interface will as following:
At this time, you can press the number key and the delete key to set and modify the
parameters. After the modification is completed, press the [Enter] key to save the parameters,
and press the [Exit] key to cancel the modification parameters and return.
This parameter has different uses such as:
When in idle, this speed is the speed at frame.
During the cutting process, you can modify the speed of the current layer to modify the
processing speed of the current layer.
