
RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
104
SHENZHEN RUIDA TECHNOLOGY CO., LTD
connection
Not set to network connection
properly
Please set the connection
method
to
network
connection
The mainboard and computer
are not connected to the
network cable or the network
cable is faulty.
Please replace the network
cable to ensure that the
network cable is connected
properly.
U disk failed to read
the file U
No file or format is incorrect
Please copy the standaline
file in the correct format to
the U disk
U disk format is incorrect
Please format the USB flash
drive in FAT16 or FAT32
format.
U disk has a virus causing file
corruption
Please clean up the U disk in
time.
sometimes wireless
handheld box
buttons fail
Handheld battery is low on
battery
Please replace the battery
with a new one.
Strong
electromagnetic
interference nearby
Try to avoid electromagnetic
interference areas
Do not operate the handheld
box for a period of time, the
button press time is too short.
Do not operate the handheld
box for a period of time. the
button needs to be pressed
for a long time.
[Capacitor
calibration], when
touched the metal
plate , it still moves
downward.
There is slag on the nozzle,
etc., causing the amplifier fail
to detect the touch plate.
Clean the nozzle and keep
the nozzle clean
Poor contact between the
metal plate and the machinel,
causing the amplifier fail to
detect the touch plate
Ensure that the metal plate is
in good contact with the
machine
Metal plate with plastic
protective
Remove plastic protective
[Capacitor
calibration], prompt
[capacitor calibration
failed]
In [Capacitor Calibration],
press the [Stop] button
-
In [capacitor calibration], the
cutting head is too high from
the metal plate
When [capacitor calibration],
first move the cutting head
close to the metal plate