Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
51
will remain set. If connectivity fails, then the device will revert to the previous VLAN set-
tings. A pop-up message will tell you whether the test passed or failed and VLAN values
were reverted.
•
Update Settings (no testing, override)
: When you click
Update Settings (no test-
ing, override)
, you are saving configuration changes without a connectivity test.
VLAN configuration examples
Default Configuration
By default, the Management network and all WLANs are mapped to the same VLAN and are
available untagged on all ports.
VLAN Separation
In this example, each wireless LAN (wlan
#
) is mapped to a different VLAN (e.g., wlan0 is
mapped into VLAN 11). All of these WLANs are available on the WAN port where the Manage-
ment network is untagged and the rest of the VLANs are tagged.
The Management network is available untagged on all ports.
FIGURE 4-14
Physical Port Separation
In this example, each WLAN is mapped to a physical port. None of the networks is tagged.
