Rugged Radios | www.ruggedradios.com | 888-541-7223
1. PLAY / PAUSE / PHONE
plays or pauses music; answers or ends phone calls.
2. LED
green indicates power is on, red indicates transmitting.
3. BLUETOOTH
pairing mode active when SS-WM1 is powered on.
4. AUDIO OUT
for recording audio; e.g. a GoPro.
5. ON / OFF
SS-WM1 power switch.
SS-WM1
USER MANUAL
1
2
3
5
4
Bluetooth Pairing for Music and Cell
Start with the intercom powered off and the bluetooth function of your phone or device powered off.
2-Way Radio Use
Received audio is controlled by your radio's volume control, not the intercom volume control. The
Push-To-Talk (PTT) Button is used for transmitting over a 2-way radio connected to your intercom. To
transmit, press and hold the PTT button, speak, and release when finished.
1. Turn on the SS-WM1.
2. Turn on the phone or device's bluetooth.
3. Wait for "SS-WM1" to be displayed on the device.
4. Select "SS-WM1" and wait for the device to pair.
5. If pairing is not successful, restart the process.
Pro Tips:
- Audio volume is controlled by the paired device.
- Some devices may need to enter pairing mode; e.g. pair new device, pair +, etc.
Pro Tips:
- When transmitting, the LED on both the intercom and radio should illuminate red.
- Music (Bluetooth) volume will dim down when transmitting and receiving.