background image

INSTALLATION GUIDE

DRIVER COIL
CORD PTT

ANTENNA

If using optional Audio Filter, connect
radio and SS-WM1 power leads directly
to Audio Filter and NOT to the battery. 

AUDIO

FILTER

PO

WER

SS-WM1

Rugged Radios     |     www.ruggedradios.com     |     888-541-7223

This is a universal wiring diagram. Your exact configuration might vary depending on the system purchased.

HEADSET

 connects driver headset to SS-WM1.

Route away from power and antenna cables.

RADIO

 connects to optional radio.

POWER

 c/- directly to 12v battery.

PUSH-TO-TALK

 connects driver PTT to SS-WM1.

Radio & SS-WM1 Mounting

Both the SS-WM1 and radio come with universal
mounting brackets. Vehicle specific mounting
options are sold separately.
DO NOT mount the radio or SS-WM1 near an
ignition box to avoid RF interference.
Route antenna cable away from power leads.

Connect Power

Route all power cables directly to the battery. 
DO NOT connect inline with other components. If
power is tied to ignition, lights or other power sources,
a ground loop problem may occur, causing noise in the
system. 
DO NOT remove any fuses that are in line with factory
cables or otherwise modify power cables.


Reviews: