Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
29
RTS/CTS Threshold
(The default value is
2346
.) This option determines at what
packet length the RTS/CTS function is triggered. A lower thresh-
old may be necessary in environment with excessive signal noise
or hidden nodes; but may result in some performance degrada-
tion.
5
Click
Update Settings
to save and apply the changes.
A confirmation message appears at the top of this workspace.
6
Click
Go back to Wireless Configuration
to reopen the previous workspace.
Customizing Wireless Hotspot Settings
1
After opening the Web User interface, click
Wireless
under Configuration.
2
When the Configure::Wireless::Common workspace appears, click one of the four
Wireless (#)
tabs.
The Configure::Wireless::Wireless (#) workspace appears.
FIGURE 3-11
3
Make the following entries:
Wireless Availability
This option controls whether or not the wireless network is
available to users (Off or On).
Broadcast SSID
This option controls whether or not the hotspot SSID is visible to
anyone looking for wireless networks. Disabling (hiding) the SSID
requires the user must be told the correct SSID before they can
connect to your network.
SSID
This is the publicly-broadcast “name” of your wireless network.
A default SSID is present (which you ideally replaced in the
installation process). If the default SSID is still active, it is
strongly recommended that you change it. An effective SSID
