Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
42
CTS-only
Choose this option to force all destination devices to acknowledge
their ability to receive data when a transmission is initiated.
RTS/CTS
Choose this option to force both sending and receiving devices to con-
firm a data exchange on both ends before proceeding.
For information on “Protection Mode”-specific Threshold options and how they can be
customized on an individual hotspot basis, see
“Setting Threshold Options”
on
page 27.
5
Click
Update Settings
to save and apply the changes.
Changing the Wireless Availability Setting
This controls whether or not a hotspot is active. To deactivate a hotspot, use this feature.
1
Open the Web User interface, and click
Wireless
under Configuration.
2
When the Configure::Wireless::Common workspace appears, click the relevant
hotspot-specific tab.
FIGURE 4-7
3
When the Configure::Wireless::Wireless [#] workspace appears, click one of two
Wire-
less
Availability
options for this hotspot.
4
Repeat the previous step with the remaining hotspot tabs, as needed.
5
Click
Update Settings
to save and apply the changes.
Changing the Broadcast SSID setting
This controls whether or not a hotspot sends out an SSID to any nearby wireless devices. If
you deactivate it, you control access to a hotspot to those people who “know the hotspot
name”.
1
Open the Web User interface, and click
Wireless
under Configuration.
