Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
49
VLANs
The VLAN page is used to configure the virtual LAN (VLAN) parameters of the AP. Traffic
never uses VLAN tags over wireless links, but traffic originating on or destined for wireless-
LAN stations can be differentiated by a VLAN identifier as it travels over other links, such as
Ethernet, DSL or cable-Internet, etc., thus given the appropriate priority as it traverses the
Internet.
VLAN topics covered in this section
•
“Navigating the VLAN page”
on page 49
•
“VLAN configuration examples”
on page 51
•
“Changing a VLAN ID”
on page 52
•
“Changing the port state for a VLAN”
on page 52
•
“Changing an RJ45 port’s VLAN tagged state”
on page 53
FIGURE 4-11
Navigating the VLAN page
•
Name
: The name appearing in the first cell of each column identifies each "network".
Here the term refers to a single broadcast-domain. There is also a "Management" network,
referring to communications directly to the AP/Router.
