Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
26
WARNING
—Selecting the incorrect country or region may result in vio-
lation of applicable law.
3
[-Optional-] Click
Update Settings
before reviewing the “common” advanced options.
Reviewing the Advanced::Common Options
This workspace permits access to advanced wireless functions. These settings should only be
changed by an experienced administrator. Incorrect settings can severely impact wireless
performance. It is recommended that the default settings be retained for best performance.
1
In the Configure::Wireless::Common workspace, click
Edit Common Settings
.
The Configure::Wireless::Advanced::Common workspace appears.
2
Make the following entries, as needed:
Data Rate
(The default value is
Best
.) Select the preferred rate of data transmis-
sion from the drop-down menu. Selecting Best allows the AP to adapt
data transmission to the best rate available. The efficacy of rates
listed in the Data Rate drop-down menu is dependent on the Wireless
Mode previously specified.
WARNING
—In order to fully benefit from the Ruckus AP’s capabilities,
it is advisable not to change this value unless absolutely necessary.
Transmit Power
(The default is
Full
.) Select the level of transmit power from the drop-
down menu. This option sets the maximum transmit power level rela-
tive to the pre-defined power (this value differs according to the cur-
rent country code).
Beacon Interval
(The default value is
100
.) A beacon is a broadcast packet regularly
sent out by the AP to continually synchronize wireless network com-
munication. The Beacon Interval value determine the frequency, mea-
sured in milliseconds.
Protection Mode
(
Inactive
by default.) If you activate protection, you control how
802.11 devices know when they should communicate to another
ALERT
If your AP was shipped in the United States, the country code was pre-defined for “United
States” and cannot be modified.
FIGURE 3-8
